Pellet Ring Die

Pellet Ring Die

Making pellet ring die is a more advanced procedure than making firewood that is traditional but if you know the best way to make pellet ring dies and have the correct tools it is not that difficult.

What you’ll need is raw material and a pellet factory. Pellets can be made from many types of biomass like wood, straw, corn stalks, grass clippings, and leaves just to name some. The procedures for all these materials are not dissimilar.

The raw material will first have to be reduced with hammer mill or a chipper until the bits are not large enough to fit into the dies of your pellet mill. If you’re using fine sawdust this step might not be necessary.Here are a couple of tips to allow you to select pellet ring die on

Another task would be to dry the material. To find the best quality pellets the moisture content should be 15%.The lower the moisture the more efficient the pellet will burn. But the material needs a certain amount of moisture for the pellet making procedure.

For some materials you’ll need to add binders including vegetable oil in order to bind the pellet together. But with many substances like softwoods they include enough natural lignins to bind the pellet.

A roller press the material through the dies and will roll across the stuff. The dies are funnel shaped holes that taper down to the size of the finished pellets. The pressure of driving the material creates heat that melts other binders and the lignins.

Now that the pellets are formed through the will need to be cooled. The most simple way to cool them is to spread them out and enable them to cool naturally.

It is a straightforward procedure to make pellet ring dies and with small scale pellet factories now homeowners can make their own pellets or make a profit. Just about any pellet factory will make pellets but you’ll need the right knowledge in order to make quality pellets that will operate correctly in your pellet stove.

Get a step-by-step guide which will teach you how to make pellet ring dies.